🔍
🔍
🔍
🔍
S365C Shear
| Dimensions | |
| Jaw Depth | 33 in |
| Cycle Time - Close | 3 Seconds |
| Jaw Width - Moving | 6 in |
| Rotation Circuit - Maximum Relief Pressure | 2030 psi |
| Jaw Width - Fixed | 18 in |
| Cutting Circuit - Maximum Relief Pressure | 5075 psi |
| Tip Force | 226 Sh Ton |
| Width | 46 in |
| Length | 151 in |
| Weight - Stick Mount | 14770 lb |
| Jaw Opening | 33 in |
| Shear Arm Torque | 1536000 lb/ft |
| Height | 75 in |
| Rotation Circuit - Maximum Flow | 21 gpm |
| Apex Force | 422 Sh Ton |
| Weight - Boom Mount | 15145 lb |
| Cutting Circuit - Maximum Flow | 140 gpm |
| Throat Force | 1162 Sh Ton |
Bolt-On Piercing Tip
Piercing tip is bolt-on for rapid maintenance and low operating cost. Tip is fully reversible, giving two uses per set.
Jaw Design
Unique straight lower jaw design effectively enhances the cutting force by facilitating the spreading out of steel along the length of the jaw, maximizing the shear cutting force.
360-degree Rotation
Operator can spin the jaws 360 degrees in either direction to quickly position the jaws for a cut.
Reversible Knives
The four main, side and front knives are fully reversible with four effective cutting edges.
Easy Maintenance
Large access panels on the top, bottom, and sides of the shear housing make it easier to service inside components.
Protected Cylinder
Design of the shear housing provides full protection of the cylinder throughout the complete cutting cycle.
Completely Cat
Only Caterpillar offers an integrated machine-hydraulics-shear system supported by Caterpillar from front to end, throughout the life of the system.
